Planning Notice

Former Powergen site, Victoria Road – decided

8 October 2018

Discharge condition 6 plots 1 and 2

17/00018/CONR/AS

Decided: Permit

Original Application

17/00018/AS

Proposed variation of Condition 08 of planning permission 15/01671/AS to replace the following approved plans:-

  • Site Plan Proposed Illustrative Masterplan 14.046.S01.B
  • Plots 3, 4 &; 5 Block Plan 14.046.101 F
  • Parameter Plan Proposed Critical Distances 14.046.104 F
  • Parameter Plan Proposed Range of Building Heights 14.046.105 F
  • Parameter Plan Proposed Building Levels &; Plot Extents 14.046.106 G
  • Parameter Plan Proposed Access, Routes and Communal Landscaped Areas 14.046.107 G

Posted on 19 January 2017

15/01671/AS

Hybrid application for five plots comprising:

  1. Full and detailed application for plots 1 and 2 comprising: erection of 400 dwellings, a retail kiosk/cafe unit (Use class A1/A3) and associated parking, public surface car park, plant and storage; together with landscaping and access works.
  2. Outline application with appearance and landscaping reserved with parameters for plots 3, 4 and 5 comprising:  demolition of existing buildings/structures and erection of up to 260 dwellings, associated parking, plant and storage together with landscaping and access works.

Posted on 16 January 2016

Conditions

  1. Construction
    Prior to the commencement of each Plot a Code of Construction Practice for the relevant plot shall be submitted to and approved in writing by the Local Planning Authority. The construction of each plot shall then be carried out in accordance with the approved Code of Construction Practice for the relevant plot and BS5228 Noise Vibration and Control on Construction and Open Sites and the Control of dust from construction sites (BRE DTi Feb 2003) unless previously agreed in writing by the Local Planning Authority.
    The Code of Construction Practice shall include,

    1. Measures to minimise the production of dust
    2. Measures to minimise the noise (including vibration) generated by the construction process to include the careful selection of plant and machinery and use of noise mitigation barrier(s).The measures shall include but not be limited to a BS5228 assessment to protect Victoria road primary school from construction noise and vibration as recommend by para 8.1.2 of the Merebrook Environmental Noise
      Assessment Report ENA-1943-15-280 Rev B dated December 2015.
    3. Maximum noise levels expected 1 metre from the affected façade of any residential unit adjacent to the plot
    4. Location of construction compound and design and provision of site hoardings
    5. Management of traffic visiting the plot including temporary parking or holding areas
    6. Provision of off road parking for all site operatives
    7. Measures to prevent the transfer of mud and extraneous material onto the public highway
    8. Measures to manage the production of waste and to maximise the re-use of materials
    9. Measures to minimise the potential for pollution of groundwater and surface water
    10. The location and design of site office(s) and storage compounds
    11. The location of temporary vehicle access points to the plot during the construction works (including loading and turning of construction vehicles)
    12. Lorry routing to the site from the M20
    13. The arrangements for public liaison during the construction works

Planning Notice

Land at junction of Romney Marsh Road and north of, Norman Road, Ashford

19 September 2018

EIA Screening opinion for a proposed development of up to 300 dwellings.

18/00005/EIA/AS

Decided: EIA not required

This is an application asking the Ashford Borough Council (ABC) whether or not any future planning application needs to include an Environmental Impact Assessment when/if it is submitted or the scope of any future assessment. It is not a planning application and ABC will not be considering the planning merits of the proposal.

The decision of the council is limited by the requirements of the EIA Regulations. The Community Forum and local residents are not consulted on EIA applications but will be if a planning application is made in the future.

More information is available on the EIA page on the ABC web site.

Planning Notice

147 Beaver Road, TN23 7SG

17 September 2018

Part discharge of condition 7

18/00693/CONA/AS

Decided: Permit

Original Application

18/00693/AS  Single storey rear extension  17 May 2018

Conditions

  1. No development shall take place until the applicant, or their agents or successors in title, has secured the implementation of a watching brief to be undertaken by an archaeologist approved by the Local Planning Authority so that the excavation is observed and items of interest and finds are recorded. The watching brief shall be in accordance with a written programme and specification which has previously been submitted to and approved in writing by the Local Planning Authority.

Planning Notice

Former Pledges Mill and South Kent College Site and Land south of junction of Beaver Road and, Victoria Road – decided

17 September 2018

Discharge of condition 89 Part Discharge 36 Part A, 64 Part A Part Discharge 33 & 61 Brick Type

17/01759/CONE/AS

Decided: Permit

Original Application

Case Ref Description Posted on
17/01759/AS Proposed minor material amendments to planning permission 16/01157/AS involving design changes to Phase A2 (X3 commercial uses (Use Classes A1/A2/B1) &; Phase A3 (216 residential units) with associated parking, substations, landscaping and access works relating to land south of Victoria Road ONLY with no design changes to the approved development of land north of Victoria Road for the purposes of a brewery with shop, bar and restaurant (use classes B2/A1/A3/A4).Full planning application for development of a brewery, with shop, bar and restaurant (Use Classes B2/A1/A3/A4), three commercial units (Use Classes A1/A2/B1) and 216 residential units with associated parking, substations, landscaping and access works. 12 Dec 2017
16/01157/AS Full planning application for development of a brewery, with shop, bar and restaurant (Use Classes B2/A1/A3/A4), three commercial units (Use Classes A1/A2/B1) and 216 residential units with associated parking, substations, landscaping and access works. 10 Aug 2016

Conditions

LAND FORMING PHASE A2 TO SOUTH OF VICTORIA ROAD
(RESIDENTIAL AND COMMERCIAL – C3/B1/A1/A2/A3)
Materials
  1. Prior to installation, written details including source/ manufacturer, and samples of bricks, tiles and cladding materials (including jointing of panels) to be used externally shall be submitted to and approved in writing by the Local Planning Authority and the development of land forming Phase A2 shall be carried out using the approved external materials. The details shall be supplied as appropriate on a materials board.
Fine details
  1. Prior to installation, unless specified to the contrary, the details set out below shall be submitted to and approved in writing by the Local Planning Authority and, thereafter, development shall only be carried out in accordance with the approved details unless agreed otherwise by the Local Planning Authority in writing. Where relevant, the following details should be provided on drawings at an appropriate scale of 1:50 (where detail needs to be considered contextually related to a façade) and at 1:20 in other cases:-
    1. full details of glazing and external doors, including all external joinery and framing methods and external colour (1:20),
    2. 1:20 horizontal and vertical cross sections through typical sections of each of the facades sufficient to show the relationship between the façade and those elements of detail to be embedded within the façade as well projecting from it (such as the extent of recessing of glazing and doors in openings created in the façade, the consequential treatment of window reveals, the details of cills and the extent of projecting elements from the façade),
    3. 1:100 elevation detailing the locations of all expansion joints in facades,
    4. details of any plant or machinery proposed on the roof and associated screens,
    5. details of any satellite dishes or antenna,
    6. details of rainwater goods, eaves, fascia and entrance canopies (including materials and finish, details of any supporting posts and related brick plinths and roofing materials),
    7. details of vents, louvres, extractor vents, external pipes, meters etc.
    8. details of screens and windbreaks,
    9. 1:50 scale details of the parapet capping,
    10. details of external entrance steps, handrails and balustrades.
LAND FORMING PHASE A3 TO SOUTH OF VICTORIA ROAD (RESIDENTIAL BUILDING)
Materials
  1. Prior to installation, written details including source/ manufacturer, and samples of bricks, tiles, feature panels and cladding materials (including jointing of panels) to be used externally shall be submitted to and approved in writing by the Local Planning Authority and the development of land forming Phase A3 shall be carried out using the approved external materials. The details shall be supplied as appropriate on a materials board.
Fine details
  1. Prior to usage in the building on the land forming Phase A3 above ground level, the details set out below shall be submitted to and approved in writing by the Local Planning Authority and, thereafter, development shall only be carried out in accordance with the approved details unless agreed otherwise by the Local Planning Authority in writing. Where relevant, the following details should be provided on drawings at an appropriate scale of 1:50 (where detail needs to be considered contextually related to a façade) and at 1:20 in other cases:-
    1. full details of glazing and external doors, including all external joinery and framing methods and external colour (1:20),
    2. 1:20 horizontal and vertical cross sections through typical sections of each of the facades sufficient to show the relationship between the façade and those elements of detail to be embedded within the façade as well projecting from it (such as the extent of recessing of glazing and doors in openings created in the façade, the consequential treatment of window reveals, the details of cills and the extent of projecting elements from the façade),
    3. 1:100 elevation detailing the locations of all expansion joints in facades,
    4. details of any plant or machinery proposed on the roof and associated screens,
    5. details of any satellite dishes or antenna,
    6. details of rainwater goods, eaves, fascia and entrance canopies (including materials and finish, details of any supporting posts and related brick plinths and roofing materials),
    7. details of vents, louvres, extractor vents, external pipes, meters etc.
    8. details of screens and windbreaks,
    9. 1:50 scale details of the parapet capping,
    10. details of external entrance steps, handrails and balustrades.
Adaptation of ground floor units to meet wheelchair user requirements
  1. Prior to the laying of foundations to the building approved to be constructed on the land forming Phase A3, a plan to show the location of five apartments available for adaptation to meet wheelchair user requirements shall be submitted to, and approved by, the Local Planning Authority in writing and thereafter the development shall only proceed in accordance with such details unless the Local Planning Authority has agreed to any variation in writing.

Planning Notice